General Specifications
• 24 Mosfet Digital Outputs with shared negative pole, 5 - 30 V collectively
DC
supplied.
• Digital outputs available both by terminals and IDC10/ IDC20 connectors to
facilitate the connection to external relays.
• Can Interface with CANopen protocol up to 1 Mbps speed or MODBUS RS485
Interface up to 115 Kbit/s speed.
• CANopen/MODBUS Baud rate and Node ID configurability by DIP-switches or
software.
• RS232 Serial Communication with MODBUS-RTU protocol.
• Facilitated power supply and CANopen/MODBUS bus wiring by means of the
bus housed in the DIN rail.
• 1500 VAC Isolation among output, power supply and CANopen/MODBUS
interface circuits.
• Overtemperature and short-circuit to ground of digital outputs continuous
monitoring and consequent fault condition signalling.
• Outputs value in case of no communication or fault condition: programmable
value or last set value.
• Leds Signallings: Power Supply, Digital Outputs State, CANopen/MODBUS
Communication, MODBUS-RTU Communication.
• Node guarding or heartbeat
MI001523-E
ENGLISH 2/8
Specifiche Tecniche
OUTPUTS
POWER SUPPLY
ENVIRONMENTAL CONDITIONS
Numbers of Channels
Outputs Type
Power Supply Voltage
RDS on
ON/OFF delay
Consumption
Temperature
Voltage
Maximum current
(for each output)
24
MOSFET (Open Source)
5 - 30 V
DC
0,5 A (connection from terminals)
25 mA (connection from connectors)
0,75 Ω
Max 1 ms
Typical: 1.5 W, Max: 2.5 W
-10 / +65 °C
10 - 40 V
DC
19 - 28 V
AC
