MI001523-E
ENGLISH 3/8
Installation Rules
Isolation Diagram
Standards
3-Points 1500 V isolation
AC
The module complies with the
following standards:
EN61000-6-4/2002-10 (electromagnetic emission,
industrial environment).
EN61000-6-2/2006-10 (electromagnetic immunity,
industrial environment).
EN61010-1/2001 (safety).
All circuits must be isolated from the other circuits under
dangerous voltage with double isolation. The power
supply transformer must comply with En60742: “Isolated
transformers and safety transformers”.
The module is designed to be installed in vertical position on a DIN 46277 rail. In order to
ensure optimum performance and the longest working life, the module(s) must be supplied
adequate ventilation and no raceways or other objects that obstruct the ventilation slots.
Never install modules above sources of heat; we recommend installation in the lower part of
the control panel.
Inserting on the DIN rail
As it is illustrated in the next figure:
1) Insert the rear IDC10 connector on a DIN rail free slot (the
inserting is univocal since the connectors are polarized).
2) Tighten the four locks placed at the sides of the rear IDC10
connector to fix the module.
CONNECTIONS
DIMENSIONS / BOX
ISOLATIONS / STANDARDS
Humidity
30 - 90 % at 40 °C non condensing
Up to 2000 m a.s.l.
-20 / +85 °C
IP20
4-way screw terminals (3.5 mm pitch): outputs.
CAN/MODBUS Interface and power supply (for DIN rail)
Outputs (on the rear, alternatively to terminals).
3,5 mm; RS232 (COM)
L: 100 mm, H: 112 mm, W: 35 mm
PBT, black
Altitude
Storage Temperature
Protection
Removable Terminals
Rear IDC10 Connector
IDC10 / IDC20 Connectors
Stereophonic Frontal Jack
Dimensions
Box
CAN/MODBUS
