User Manual
Z-SG2 / Z-SG2-L
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI-005370-EN
Rev. 1.0.0.2
Page 34
ATTENTION!
IT IS NOT POSSIBLE TO COMMUNICATE SIMULTANEOUSLY FROM BOTH THE RS485 PORT AND
THE USB PORT, THE USB PORT HAS PRIORITY (WHEN THE USB CABLE IS INSERTED, THE
COMMUNICATION IS ONLY FROM THE USB).
TO GET THE COMMUNICATION ON THE RS485 IT IS NECESSARY TO DISCONNECT THE USB
CABLE.
DRIVERS FOR WINDOWS SYSTEMS
Drivers for Windows systems can be downloaded from the device's web page.
The drivers are however installed automatically with the installation of the "Easy Setup" software.
DRIVERS FOR LINUX SYSTEMS
In many Linux distributions the drivers of this port are already included (for example Raspbian for Raspberry Pi
devices). It is possible to consult the web page of the device on the Seneca website for more information.
FIRMWARE UPDATE
In order to improve, add, optimize the functions of the product, Seneca releases firmware updates on the
device section on the
ATTENTION!
NOT TO DAMAGE THE DEVICE DO NOT REMOVE THE POWER SUPPLY DURING THE FIRMWARE
UPDATE OPERATION.
To update the firmware in the menu, select Update Firmware-> Update:
