User Manual
Z-SG2 / Z-SG2-L
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI-005370-EN
Rev. 1.0.0.2
Page 33
In Sample Weight mode, proceed as follows for calibration:
1)
Replace the tare on the cell
2)
Wait for the measurement to stabilize
3)
Press the "TARE ACQUISITION (FLASH)" button
4)
Replace the Tare + Sample Weight
5)
Wait for the measurement to stabilize
6)
Press the "SAMPLE WEIGHT ACQUISITION (FLASH)” button
USB PORT
The front USB port allows a simple connection using the Modbus RTU slave protocol, the communication
parameters for the USB port cannot be modified and are:
Baud rate: 38400
Address of the Modbus RTU station: 1
Data Bit: 8
Stop bit: 1
