Seneca Z-DAQ-PID, Руководство пользователя

Страница: 21 / 24

USER MANUAL – Z-DAQ-PID
21
Output current type: 0=active current (the module supplies
the loop); 1=passive current (the sensor supplies the loop) 0 Bit 12
These bits aren’t used
/ Bit [11:9]
Output type: 0=current; 1=voltage 0 Bit 8
These bits aren’t used
/ Bit [7:1]
Output limiter: 0=deactivated; 1=activated 0 Bit 0
OUT-SS MSW
See “Output”
FP-32bit_MSW R/W* 40012
OUT-SS LSW FP-32bit_LSW R/W* 40013
Output Start Scale: [mA] (if current-type output); [V] (if
voltage-type output) 0 [mA]
OUT-ES MSW
See “Output”
FP-32bit_MSW R/W* 40014
OUT-ES LSW FP-32bit_LSW R/W* 40015
Output End Scale: [mA] (if current-type output); [V] (if
voltage-type output) 20 [mA]
OUT MSW FP-32bit_MSW R 40105
OUT LSW FP-32bit_LSW R 40106
Output value: [mA] (if current-type output); [V] (if voltage-
type output) /
OUT Word R 40109
Output value: [µA] (if current-type output); [mV] (if voltage-
type output) /
OUT-Fault
MSW
FP-32bit_MSW R/W* 40020
OUT-Fault
LSW FP-32bit_LSW R/W* 40021
Fault output value (measure unit is the same of output)
Reg.40105,40106 are equal to reg.40020,40021 if
40069.2=1 (there is input burn-out error) (if out type =
analog) 0 [%]
OUT-Manual Between: 0; 10000 Word R/W* 40107
Output manual value [%
∙
100] (if it is equal to 0, it
corresponds to the 0% of the Output Scale range; if it is
equal to 10000, it corresponds to the 100% of the Output
Scale range); for selected output-type, see reg.40004 (if
operating modality=manual, constant output)
0 [%]