background image

MODULE LAYOUT

2/8

Dimensions (LxHxD)

70 x 50 x 25

Weight

45 g

Case

Self-extinguishing UL94-V0 PC / ABS material

Dimensions (LxHxD)

80 x 65 x 45

Weight

150 g

Case

Self-extinguishing UL94-V0 PC / ABS material

LED MEANING

LED

STATUS

LED meaning

Tx (Red)

Flashing

Transmission of radio packets to the R-GWR gateway

Rx (Green)

Flashing

Reception of radio packets from the R-GWR gateway

80 mm

45 mm

65 mm

70 mm

25 mm

50 mm

WARNING

: The full content of this manual must be read before any operation. The module must only be used by 

qualified electricians. Specific documentation is available via QR-CODE shown on page 1.

Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).

The symbol on the product or its packaging shows the product must be surrendered to a collection centre 

authorized to recycle electrical and electronic waste.

The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to 

electrostatic discharges. Take appropriate measures during any operation.

PRELIMINARY WARNINGS

The word 

WARNING

 preceded by the symbol   indicates conditions or actions that put the user's safety at risk.

The word 

ATTENTION

 preceded by the symbol 

 indicates conditions or actions that might damage the 

instrument or the connected equipment. The warranty shall become null and void in the event of improper use or 

tampering with the module or devices supplied by the manufacturer as necessary for its correct operation, and if 

the instructions contained in this manual are not followed.

N.B: THE LEDS, IN BOTH SENSORS, ARE PLACED INSIDE THE BOX. THEY ARE NOT VISIBLE FROM THE OUTSIDE. 

Содержание R-GWR-IP-1









Отзывы: