OmniHub CMP100 – User Manual
Page
78
of
106
3.3.19.2 Service Configuration
•
TS setting: Please refer to IP output service configuration.
•
LCN setting: You need to add NIT stream of all frequencies in the base TS
(frequency) which is used for your STB auto search and identifies all the TS
(frequencies) LCN information.
•
Check or reset each TS (frequency) Original Network ID and TS ID, which should
be different of each TS.
•
Fill the Original Network ID and TS ID of each TS (frequency) in the field of the
base TS (frequency) and then click add to create a NIT stream of this TS
(frequency).
•
Click plus icon of Descriptor and add the TS Information Descriptor in. Then fill in
the correct parameters and then click OK. (This operation should be set on
Modulator module only)
Name
Range
Name
Range
Bandwidth (MHZ)
6M
RF level
90~110
Frequency (KHz)
48000~862000
FFT Mode
2K
GI Mode
1/4, 1/8, 1/16, 1/32
RF Level Gain(dB)
45~55
QAM Mode
QPSK
16QAM
64QAM
Convolutional
Coding
1/2, 2/3, 3/
4, 5/6, 7/8
