OmniHub CMP100 – User Manual
Page
54
of
106
3.3.8.3
Module IP Output
This feature is specifically for single program encoding and IP output directly. By using
this way to output, it will not occupy baseboard multicast bandwidth.
If you want to use IP output channel in the encoder module and baseboard IP module at
same time, you should avoid the multicast IP addresses confliction. If there are two same
IP addresses enable meantime, all the multicast video will be affected.
•
Destination IP Address
and
Destination Port:
Using for multicast IP addresses
or unicast IP addresses and ports.
•
Enable Destination MAC:
Generally, you do not need to enable this option. This
is reserved for exceptional case when the unicast stream cannot be received by
using unicast IP addresses, you can enable destination MAC and streaming out by
setting Destination MAC.
3.3.8.4
EAS Settings
Settings for the EAS feature need to be made on the encoder module so that when the
EAS source is triggered, the Audio and Video from the encoder will be replace by the
Audio and Video from AES module.
EAS will ask you the Source Multicast Address, Command port and Data port. This
information can be seen in the EAS page
HDMI encoder EAS setting
