OmniHub CMP100 – User Manual
Page
35
of
106
multiple service in same channel or output same service in multiple channel. Do not
forget to click the Apply
button on the right side to make the change takes effect.
To clear the whole routing table click
button.
There is a channel scan button
on top, normally the input
service list of each channel will load itself in this page, but when you change the input
source, the list could not refresh immediately. At this time, you should refresh the changed
channels manually through the operation of selecting channel and clicking
Channel Scan
button
3.3.1.5
Module System Operation
In
System Operation
page you can change into DVBC Mode or DTMB Mode, reboot the
module, Factory Reset, and Log Export. System Tab also allows to perform the following
tasks:
•
Import / Export License
•
Log Manage
•
Reboot
•
Factory Default the unit
