Features
Location of Controls
Installation
Basic Operation for Base
A. Base Unit
B. Handset
C. Charger
A. Base Unit
B . Handset
C. Twin Charger
D. Travel Charger (for Additional Handset)
E. Ear-Microphone
F. Cigarette adaptor
G
. Ear Phone Jack
H. Battery Charge
I. Outdoor Antenna
A. Call function
B. Setting
A. Turn On/Off Handset
B. Making Calls
C. Answering Calls
D. Disconnecting calls
E. Hands-free Speaker Phone
F. Redial
G. Call waiting/Receiving a second call
H. Intercom
Basic Operation for Handset
Contents
3
5
6
6
7
8
9
9
10
10
11
11
11
12
13
14
17
19
17
20
20
20
20
20
21
20
21
21
34
If you have difficulty operating on your phone, the below suggestions
should solve the problem. If you still have difficulty after trying these
suggestions, please call your local SENAO service station for further
assistance.
1. Check the installation (P. 9-16)
2. Make sure the power cord is plugged in.
3. Is the handset battery fully charged?
4. Is the handset power on?
1. Make sure the telephone line cord is plugged firmly into the base unit
and the telephone jack.
2. You may be too far from the base unit.
3. Check the ringing volume for the handset (P. 26).
1. Is the telescopic antennas of the base unit and the handset fully
extended?
2. Move closer to the base unit.
3. Press FUNC # to change the channel.
1. Make sure that the handset has been placed on the charger or base
correctly.
2. Make sure that the battery has been paced on the charger correctly.
A. The Phone does not work......
B. The handset does not ring......
C. Interference, static, sound cuts in/out, fades......
D. The battery can not be charged......
E. The handset display Error 01 or Error 02 or Error
03...
1. Please unload the battery pack then load it again to reset the
handset.
2. If the above display content still appears, please re-register handset
to bases according to the instruction on page 27.
3. If above procedure doesn't work, please call you local SENAO service
center.
Troubleshootings
