9
A. Base Unit
Please set up the base
unit according to the
following steps (1)~(6).
(1)
Install the telescopic antenna
of the base unit and extend it
fully and vertically.
(2)
(1)
(6)
(4)
(3)
(5)
(6)
Select your
dial mode
(Tone or Pulse)
(3)
Plug the AC adaptor
into electric wall outlet.
(2)
Plug in the SENAO
AC adaptor to
DC IN jack.
(4)
Plug the
telephone line
cord into the
telephone wall
outlet.
(5)
A standard telephone may
also be plugged into
receptacle marked TEL.
Installation
28
Master Reset
3 Set Date&Time
Date Setting
Time Setting
4 Caller ID-
Area Code
+Country Code
Call Waiting--[Off , On]
This option is used to reset all options you set to default value set by
factory.
The screen will display "Reset to Default? to ask you confirm this
selection.
Either set or re-set the accurate date & time when you buy this product
or resume operating after blackout on base or press END key and
change battery pack on handset longer than one minute.
Under DTMF caller ID system when the LCD screen on handset displays
Date &Time erased, reset it", it is to remind you to take setting again.
When selected, you can check or set the date stored in the handset
and base. The format is xx(month)-xx(date)
When selected, you can check or set the time stored in the handset
and base. The format is xx(hour)-xx(minute)
Availability depends on your telephone service
This option allows you to set the caller ID options. These options are:
With this option, you can set your local area code with a max. 3 digital
number. The base will automatically delete the area code of incoming
call once the area code of your incoming call is the same as the
digital set by you, and just save the phone numbers. This option
enables handset not repeat the area code when you reply the local
phone call with ReceivedCalls option.
When selected, you can set your country code with a max. 3 digital
number. The base will automatically add the set country code on the
incoming call once the area code of the incoming code is different
from the set area code (Refer to above option). It'll allow you not forget
to dial country code for the long distance call when you reply the long
distance call with received calls option.
When On is selected, this option will activate the call waiting function.
