44
ProBee-ZE20S Series User Guide Rev.0.1
6.3.10 Terminal
Block
The development board has a terminal block for external analog inputs. Figure 6-2 shows the layout of
the terminal block. To use external analog inputs instead of the variable resistors, temperature sensor or
light sensor, the ADC_0 (SW?), ADC_1 (SW?), ADC_2 (SW?) or ADC_3 (SW?) should be placed on
EXT_?, EXT_?, EXT_?, or EXT_?.
Figure 6-2 Terminal Block for External Anlalog Inputs
6.4
Configuration Example #1: 1 Coordinator, 1 Router and 1 End-Device
Here is the example configuration to help to start with the ZE20S and the development kit. The goal of
this example is to provide hardware configuration and AT commands for the scenario as below:
•
One ZE20S module acts as a coordinator and it is connected to a host computer via USB cable.
•
One ZE20S module acts as a router and it sends temperature sensor, light sensor and digital
inputs to the coordinator every second.
•
One ZE20S module acts as a sleepy end device and it sends temperature sensor, light sensor
and digital inputs to the coordinator every second.
TBD
Figure 6-3 Example #1: 1 Coordinator, 1 Router and 1 End Device
Содержание ProBee-ZE20S Series
