Technical Explanation
SKiiP
®
3 Parallel Board
© by SEMIKRON
2017-08-30
– Rev02
4 / 20
2
Application and handling instructions
Please provide static discharge protection during handling. As long as the board is not completely
assembled, the input terminals have to be short-circuited. Persons working with devices have to wear a
grounded bracelet. Any synthetic floor coverings must not be statically chargeable. Even during
transportation the input terminals have to be short-circuited using, for example, conductive rubber.
Worktables have to be grounded.
The inputs of the board are sensitive to over-voltage. Voltages higher than V
S
+0,3V or below -0,3V
may destroy these inputs. Therefore, control signal over-voltages exceeding the above values have to
be avoided.
