pg. 12
Firmly Fasten the Charging Station
As illustrated, attach the Charging Station Head Unit to the
Pedestal Unit with the four mounting screws provided (two on
each side).
Ensure the charging station is plumb using a level.
Check that the Head Unit is now securely fastened to the
Pedestal.
Connecting the Wires
Open the Access Panel by removing the four screws. Locate and access the wires inside.
Carefully pull these wires a few inches outside of the access panel, to reveal 3 wires coming from
the Charging Station Head Unit (for Level-2 charging stations the color codes are Red, Black and
Green) and 3 wires from the Pedestal with the same color combination. Remove the insulation on
each wire and prepare to connect those using wire-nuts.
Match the wires using the colors (Black-Black, Green-Green & Red-Red) and connect them using
wire nuts as illustrated above. Once connected, slowly insert the wires into the device and replace
the access panel cover using the screws previously removed.
Caution
:
Refer to the wire color codes (
Page 6
) and strictly adhere to this convention while
connecting the charging station and electrical supply wires. Incorrect wiring can lead to an electrical
hazard.
Mounting Screws
