Model SSD1-HS
508.366.1488 | semshred.com Page 17
of 23
6.
Install bed knife bolts with six 3/8”-16 x 1 1/2" socket head cap screw and six 3/8” thick black
washer through top of clamp. Set to hand tight. The flat side of washer should be touching
clamp.
7.
Repeat steps 4-6 for the second bed knife.
8.
Wipe off rotor flats and rotor knives before attaching them one at a time with nine 3/8”-24 x
3/4" socket head cap screw. Beveled edge of knife sits in notch of rotor corner.
Figure 7
Figure 6 – Knife and clamp as
seen from drive plate side
Bed knife
Bed knife support
Bed knife
Bed knife support
Rear bed knife
clamp
Knife Bevel
