SELWOOD A25195, Руководство по сборке

Страница: 25 / 28

Step 10: Attach Belt Swings
A: Insert flexible Swing Hanger Cover over hook. (fig. 10.1)
B: Slide Swing Hanger Cover around hook until at top. (fig. 10.2)
C: Hook each swing onto hook. (fig. 10.3)
D: Twist and flex Swing Hanger Cover onto open end of hook. (fig. 10.4)
2 x Belt Swing
4x Plastic Swing Hanger Covers
Other Parts
Bolt Protrudes
Bolt
Nut
x
Bolt is Flush
Nut
Fig. 10.2 Fig. 10.3 Fig. 10.4 Fig. 10.1
Bolt Protrudes
Bolt
Nut
x
Bolt is Flush
Nut
Before playing, check that all hardware is tightened
correctly and no bolt threads are protruding. To
prevent these sharp edges, we have provided extra flat
washers that can eliminate this condition. Periodically
check hardware and tighten if required. Add an
additional washer if bolt threads start to protrude.
25
www.selwoodproducts.com