SELWOOD A25195, Руководство по сборке

Страница: 18 / 28

100°
100°
100°
Triangle Plates
Fig. 5.1
Fig. 5.2
Hardware
2 x 5/16 x 3” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
2 x 5/16 x 1-1/2” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
Step 5: Attach End Ladder to Swing Rail
A: Attach End Ladder Assembly to the side of the Swing Rail Assembly with the overhang (fig. 5.1 and 5.2) using 1
(G10) 5/16 x 3” Hex Bolt (with lock washer, flat washer and t-nut) in the top hole of each Triangle Plate and 1 (G1)
5/16 x 1-1/2” Hex Bolt (with lock washer, flat washer and t-nut) in the bottom hole of each Triangle Plate. Make
sure Swing End Assembly flares out at an angle. (fig. 5.3)
G10
Fig. 5.3
A5
G10
A1
A1
Side with
overhang
G1
G1
www.selwoodproducts.com
If you have purchased a Meadowside fort complete this step and proceed to Step 8M.
Otherwise, continue with this step and proceed to next Step.
G10
18
www.selwoodproducts.com