20
GB
21
GB
Explanation of functions/terms used
6. Explanation of functions/terms used
Functions of the iveo Sensor WS/WSRF
Sensor
Actual values for
wind and sun
Receiver compares
actual and target value
Target values for
wind and sun
Awning hand-held
transmitter
Wind protection function (Wind automatic)
Caution!
• The wind protection function is a security function.
• The wind protection function can not be deactivated.
• Sun protection systems may usually only be operated up to a certain wind
speed. The manufacturer of the sun protection system specifies the max-
imum value.
The manufacturer of the sun protection system determines the highest permitted wind
speed at which the sun protection system may still be operated. This value of the wind
speed will be saved into the receiver by using the hand-held transmitter. When the
measured value exceeds the saved value, the motor will retract the sun protection
system immediately. The sun protection system is then blocked for further use. Retrac-
tion commands will only be executed for a few seconds. The motor will immediately
retract the sun protection system again. When the measured value stays below the set
maximal value for 15…21 minutes, the sun protection system is released for further
use. Manual retracting commands will then be executed again. Provided that the sun
automatic is switched on and the threshold value is exceeded for the sun light (see
chapter sun automatic), the sun protection system will extend automatically.
Warning!
