SELVA MARINE Blue Whale 250 EFI, Руководство по обслуживанию

Страница: 332 / 377

ELEC
Electrical system
– +
8-27
6P23H11
4. Shift the remote control lever to the fully
open position and hold it.
5. Check the output voltages of accelerator
position sensor 1 and accelerator posi-
tion sensor 2.
6. Operate the remote control lever, and
check that the output voltages of acceler-
ator position sensor 1 and accelerator
position sensor 2 change continuously.
7. Disconnect the throttle cable joint from
the accelerator position sensor.
8. Disconnect the accelerator position sen-
sor coupler.
9. Connect the tester leads to the accelera-
tor position sensor terminals and mea-
sure the resistance at the fully closed
position.
10. Measure the resistance at the fully open
position.
NOTE:
Be sure to contact the accelerator lever to the
stopper
7
.
Output voltage of accelerator
position sensor 1 and 2 with the
remote control lever at the fully open
position (reference data):
Above 3.250 V
S6P24160
Accelerator position sensor
resistance between
3
–
4
, and
between
5
–
6
with the accelerator
lever at the fully closed position
(reference data):
at 20 °C (68 °F):
0.800 k
Ω
Accelerator position sensor
resistance between
3
–
4
, and
between
5
–
6
with the accelerator
lever at the fully open position
(reference data):
at 20 °C (68 °F):
5.300 k
Ω
S6P28300
3 4 56
S6P28290J
7