SELVA MARINE Blue Whale 250 EFI, Руководство по обслуживанию

Страница: 127 / 377

6P23H11
5-14
1
2
3
4
5
6
7
8
9
NOTE:
• Apply sealant to the edge of the cylinder
head cover gasket before installation.
• See the exploded diagram (5-8).
16. Install the timing belt guides, and then
adjust the timing belt-to-timing belt guide
clearance
e
.
17. Check the crank position sensor air gap
f
.
NOTE:
It is recommended to check the crank posi-
tion sensor air gap before installing the wiring
harness guide to improve working efficiency.
18. Install the wiring harness guide.
NOTE:
To install the wiring harness guide, see
“ Installing the wiring harness. ”
19. Install the spark plugs and ignition coils.
20. Install all parts removed during disas-
sembly.
21. Check that the wiring harness, hoses,
and other parts do not interfere with any
moving parts.
T
R
.
.
Cylinder head cover bolt:
1st: 8 N · m (0.8 kgf · m, 5.9 ft · lb)
2nd: 8 N · m (0.8 kgf · m, 5.9 ft · lb)
Timing belt-to-timing belt guide
clearance
e
:
1.0
±
0.5 mm (0.04
±
0.02 in)
S6P25145
e
e
S6P25160
f
Crank position sensor air gap
f
:
1.4 – 1.6 mm (0.055 – 0.063 in)
T
R
.
.
Crank position sensor screw:
4 N · m (0.4 kgf · m, 3.0 ft · lb)
T
R
.
.
Spark plug:
25 N · m (2.5 kgf · m, 18.4 ft · lb)
Ignition coil bolt:
7 N · m (0.7 kgf · m, 5.2 ft · lb)
Power unit