SELVA MARINE Blue Whale 250 EFI, Руководство по обслуживанию

Страница: 181 / 377

6P23H11
5-68
1
2
3
4
5
6
7
8
9
NOTE:
• Install the bearings in their original posi-
tions.
• Insert the projection
f
of each bearing into
the slots in the cylinder block.
6. Set the crankshaft
A
, new oil seal
B
,
and thrust bearings
C
into the cylinder
block as shown.
CAUTION:
Do not damage the oil seal when installing
it by contacting the edge
g
of the drive
sprocket.
NOTE:
• Apply engine oil to the inner oil seal and the
thrust bearings before installation.
• Do not get any engine oil to the drive
sprocket.
7. Install half of the main bearings
D
and
the thrust bearing
E
into the crankcase.
8. Apply sealant to the mating surface of
the crankcase.
NOTE:
• Install the main bearings in their original
positions.
• Insert the projection
h
of each bearing into
the slots in the crankcase.
• Do not get any sealant on the main bear-
ings.
S69J5F10
E
f
0
9
Cylinder block