F
ILOTE MODE
IL-P
(Only for product versions equipped with "Fil-Pilote")
In "Fil-Pilote" mode the device is managed by a central control system that sets the
operating mode for all the connected devices. The "Fil-Pilote" system operates with
six commands.
1.Standby: power off the heating element, the device remains active.
2.Comfort: maintains the "Comfort" temperature set by the user.
3.Eco: maintains the room temperature 3,5°C below the "Comfort" temperature.
4.Anti-freeze: maintains the room temperature at 7°C.
5.Comfort-1: maintains the room temperature 1°C below the "Comfort" temperature.
6.Comfort-2: maintains the room temperature 2°C below the "Comfort" temperature.
To set this operative mode:
- Press the [Mode] button until the "Fil-Pilote" icon is displayed.
-Set the desired temperature through the [+] and [-] buttons and wait until the
displayed temperature stops blinking.
If "Fil-Pilote" is not installed, the default mode of operation is "Comfort".
“O
W
D
”
PEN
INDOW
ETECTION FUNCTION
This enables detecting of an open window by sensing a sudden decrease of the
temperature in the room. In such a case, the device deactivates the heating element for
30 minutes, at which point the radiator will resume to operate in the previously set state.
When the function is activated, the window symbol on the display is on.
When the function is active and window opening is detected, the window symbol on the
display is intermittent.
When the function is disabled the window symbol does not appear on the display.
- To activate the function, press the [mode] and [-] keys simultaneously for more than
three seconds.
-To deactivate the function repeat the procedure.
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
“
”
Synthesis Plus
cronothermostat for towel rail
EN
Comfort technology division
Selmo
Rev. 01- Sept. 2017
