4. OPERATING THE DEVICE
Press [Mode] button to select the desired operative mode. An icon on the display
indicates the selected operating mode, according to the following table
COMFORT MODE
The "Comfort" stably maintains the room temperature to a selected value.
-
This mode of operation is intended for the normal use of the device.
-
Press the [ Mode ] button until the display shows the “Comfort” icon
Set the desired temperature through [ + ]and [ - ] buttons and wait until the displayed
temperature stops blinking.
NIGHT MODE
The "Night" mode sets a value of temperature below the "Comfort" temperature value.
It is suggested to set this operating mode during the night or when the room is not occupied
for 2 or more hours.
-Press the [ Mode ] button until the display shows the " Night" icon
-Set the desired temperature through [+] and [-] buttons and wait until the displayed
temperature stops blinking.
ANTIFREEZE MODE
In "Antifreeze" mode the temperature is fixed to 7°C. The device activates the heating
element when the room temperature falls below 7°C. It is suggested to set this operating
mode when the room is not occupied for several days. Press the [ Mode ] button until the
display shows the "Antifreeze" icon
BOOST MODE
-The "Boost” mode can be used to quickly warm up the room.
-Press the [Mode] button until the display shows the "Boost" icon.
The heating element is activated for 2 hours, regardless of temperature
set (however, the maximum temperature reached is 32 ° C).
At the end of 2 hours the thermostat returns to the previous mode. If necessary, the user can
disable the function at any time by pressing the [Mode] button
Fil-pilote Comfort
Night
Antifreeze
Boost 2H
2h
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
“
”
Synthesis Plus
cronothermostat for towel rail
EN
Comfort technology division
Selmo
Rev. 01- Sept. 2017
