7. RESET
- Press
to activate the stand by mode.
button
-
[On/Stand-by]
- Press the [+] and [-] buttons simultaneously to menu access.
- Scroll through the menu with the [+] or [-] until the appearance of the written res (Reset).
- Confirm with the [mode] button and then press the [+] button to confirm the reset.
- The thermostat will return to factory default settings.
The manufacturer reserves the right to make any changes to the product described in this
manual, at any time, and without prior warning.
DISPOSAL
This device is not an ordinary household refuse.
It must be disposed of in appropriate collection centers. For replacement it can be sent to the distributor. This
end-of-life product allows us to preserve the environment and stop the consumption of natural resources.
This symbol applied to the product indicates the obligation to deliver to a special collection center to be
disposed of in accordance with Directive 2002/96 / EC (WEEE).
Symbol: "Active heating element"
When the symbol is on, the heating element is working and
the towel warmer is heating
WARNING:
In case of failure of the temperature sensor, the
word "ALL" is displayed on the display to indicate the
malfunction.
Contact support.
REMOTE CONTROL (OPTIONAL)
Synthesis is equipped with an IR receiver and therefore it can
be remotely controlled through the optional remote-control
device. All the functions previously described are available on
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
“
”
Synthesis Plus
cronothermostat for towel rail
EN
Comfort technology division
Selmo
Rev. 01- Sept. 2017
