SELMI TOP EX, Руководство пользователя и обслуживания

Страница: 17 / 55

Safety section
User and service manual
– TOP EX – Continous tempering machine 15
Warning
The clothing of whoever operates or carries out
maintenance on the machine must conform to
the essential safety requirements defined by
European directive and the laws in force in the
country in which the machine is installed.
Attention
During maintenance operations individuals must
wear
adequate clothing to prevent the
occurrence of accidents.
In order to avoid mechanical risks such as snagging or
dragging, it is prohibited to wear particular objects such
as bracelets, watches, rings or necklaces during the
working cycle and during maintenance operations.
2.7. Residual risks
The accurate risk analysis carried out by the
manufacturer and archived in the technical file has
eliminated most of the residual risks, which are
nevertheless present during the use of the machine, to
acceptable levels.
The manufacturer’s recommendation is to meticulously
adhere
to the instructions, procedures and
recommendations contained in this manual.
Attention
It is strictly prohibited to carry out any type of
mechanical or electrical modification so as not
to create added dangers and unforeseen risks.
Attention
During cleaning and maintenance operations
and during the work cycle, do not allow the
product inside the tank to come into contact with
water or other fluids.
Attention
If the machine remains unused for long periods
of time please take note of the expiry date of the
product remaining inside the machine. Upon
restarting the processing only insert new
chocolate if the product already in the machine
has not expired. If the old product has expired,
proceed to empty and clean the machine before
inserting the new product.
Attention
Keep the machine with the residual chocolate
inside the tank in an adequate environment with
temperatures ranging from 10 °C to 25 °C.
The residual risks present on the machine are:
Risks during machine transportation
It is recommended to fasten the machine, or its parts,
at the dedicated locations and lift it with appropriate
means to the minimum permitted height, proceed at
low speeds and make sure that the people helping with
the moving are at a safe distance from the moving
object. Before moving the machine make sure that the
passage is clear and that there are no objects placed
on the machine. It is important that the means of
support and transportation is controlled by a person
qualified for such a role, so as to avoid unforeseen
movements which may be dangerous to the people in
the vicinity who are helping with the moving.
Risks of faults to the circuits of signalling, safety,
protection and emergency stop
In the case of a circuit fault, the safety and signaling
circuits, the anti-injury protections and the emergency
stop can lose their effectiveness, therefore it is asked
that their functionality is periodically checked.
Identified residual risks and information plaques
The manufacturer has placed on the machine danger
and/or warning plaques, based on the residual risks,
with pictograms in compliance with the norm pertaining
to the display of graphic symbols on the machine.
The user should immediately replace these plaques if
they are not clearly legible.