SELMI TANK 200, Руководство пользователя и обслуживания

Страница: 14 / 53

TANK
10
1.7. Details of the manufacturer
The machine described in this instruction manual was built
by:
SELMI S.r.l.
Via Statale, 151 – 12069 – S. Vittoria D’Alba (CN) Italia
Tel. 0172.479273 - 0172.479275 - Fax 0172.477814
www.selmi-group.it - info@selmi-group.it
1.8. Identification plate of the machine (CE marketing)
There is a plate, similar to the one shown here, on the
machine, indicating details of the manufacturer, the CE
conformity mark and the machine’s serial number. Always
state this number when communicating with the
manufacturer.
Example of identification plate on the machine structure
TYPE
SERIAL NUMBER
YEAR
WEIGHT
1.9. Identification plate of the CE marking electric panel
(low voltage)
Example of identification plate on electrical panel. The correct
data shown in the section on the machine’s technical
specifications.
1.10. Inteded use
Chocolate mixers and melters TANK 400 Continuous
chocolate mixer and melter. Entirely built in stainless steel
AISI 304. The mixer can be operated in a continuous or
intermittent mode with programmable temperatures and
timed mixing. The heating of the tank and of the exit conduit
are separately thermoregulated. Integrated pump for the
supply of the relevant machines.
Warning
A use other than that specified is considered
improper. The machine is intended for professional
use only.
Attention
Do not place any small objects near the control panel
or the tank: they could fall and enter the tank, which
would contaminate the product.
1.11. Operating environment
To guarantee proper functioning the machine must be
protected from atmospheric agents. Its ambient operational
temperature should be between 15C° and 25C° with relative
humidity not exceeding 70%.
The working environment must be clean, sufficiently
illuminated and away from an explosive environment.
The environmental characteristics of the installation site are
specified in section 4.
Attention
The machine’s fixed guards have a variety of
openings to allow the internal units to cool. When the
machine is running, make sure that these openings
are not covered by cloths or objects that obstruct
proper air flow.
1.12. Noise level
The phonometric tests carried out on this specific machine
model show an acoustic pressure lower than
70 dB(A).