5
STEP 3: LINK REMOTE
The remote control has multiple
channels. Before linking the remote,
determine which shade(s) you want on
which channel. The standard remote
has 5 channels, the remote with timer
has 6 channels. All shades linked to
a remote will also automatically be
programmed to the “ALL” channel.
P
Setting
(red button)
Setting
(red button)
Remove plastic film from the front of the remote.
If battery is not already installed in the remote follow the instructions on page 18.
If using a timer remote, Turn the remote on using the power button on the
right side of the remote. Then, tap the clock button until you see “MANUAL”
in the display.
1. Press the
SETTING
button on the motor until the shade jogs once. Release
the button immediately after the first jog - this should not be more than 3
seconds.
2. Repeat this step for all shades that will be controlled by the same channel.
3. Select the channel that you want to program using the
CHANNEL
selector
button.
4. Press and hold the
CONFIRM
button until the shade(s) jogs once. The shade
is now linked to the remote.
5. Repeat steps 1-4 to program the rest of the channels.
CH
06:42
MANUAL
Power
Button
Up
Stop/Favorite
Down
Channel
Clock
Confirm Limit
Timer Remote
Display
Screen
1
2
3
4
5
Channel
Display
Stop/Favorite
Down
C
Channel -
Standard Remote (front)
C
L
Confirm
Limit
Standard Remote (back)
Up