4
Idler Side Bracket Motor Side bracket
Foot
T-Hook
The installation brackets are always mounted
so that the inner surfaces face each other.
Brackets must be in line and level. Shim
brackets on inside mounts if necessary. The
head rail must be level for the shade to operate
properly.
SHADES WITH NO HEAD RAIL
Inside Mount
Minimum 1
1
⁄
2
” surface
Outside Mount
Minimum 1
1
⁄
2
” surface
1
1
⁄
2
”
1
1
⁄
2
”
STEP 2: SHADE INSTALLATION
Push the rail back until it
is fully engaged
Center the shade in the window opening and push the head rail into the
mounting brackets as shown.
SHADES WITH HEAD RAIL
Once the brackets are secured and level, the
fabric roll can be inserted. Make sure your
hands are clean to avoid soiling the fabric.
Insert the foot of the motor-side bracket
into the slotted center hole of the motor
end of the fabric roll. The wire should be
positioned so that it goes up on an inside
mount or back on an outside mount. This
will provide easy access to the setting button.
Nub
Support Bracket
Fig.15
Idler Post
V slot
SHADES WITH NO HEAD RAIL
Set the post of the idler end into the V of the support bracket. Rotate the
T-hook on the support bracket to lock in the post and secure the fabric roll.
