2
STEP 1: BRACKET INSTALLATION
Shades are shipped with the required number of brackets for proper installation.
End brackets should be located approximately 3” from either end. Depending
on the width of the shade, additional brackets may be necessary, evenly spaced
between the two end brackets.
Using the installation bracket as a template, measure to the edge of the bracket
and mark the hole locations with a pencil for drilling.
Brackets must be in line and level. Shim brackets on inside mounts if necessary.
The head rail must be level for the shade to operate properly.
Shade Width # of Brackets
Up to 40”
2
>40” - 72”
3
>72”- 84”
4
>84” and up
5
SHADES WITH HEAD RAIL
3”
3”
INSIDE MOUNT
The minimum mounting depth for an inside
mount is 1
”
.
A minimum of 3
3
⁄
4
”
is needed to fully recess the
shade.
Make sure the brackets are level and aligned.
Attach using two screws.
Inside Mount
Shallow Mount - Minimum 1” surface
Flush Mount - Minimum 3
3
⁄
4
” surface
1
”
Important: If a solar recharge unit is being installed read the section on solar
recharge on page 20 prior to installing mounting brackets.
