INSTRUCTION MANUAL
CODE 80158 REV E
02/2021
Page: 21
J
.P. SELECTA s.a.u.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: [email protected] - website: http://www.grupo-selecta.com
Fumes removal
Allocated over the sample
tubes, they drive the fumes
to scrubbing and neutralizer
system.
Digestion tubes
Allocates the samples.
Sample tubes rack
Accommodates the sample
tubes to allow its transporta-
tion and provides a thermal
isolation when they are on
the heater block.
Grid holder
Acomodates the sample tube
rack when it’s outside of the
heater.
Fumes removal holder
Allocates the fumes collector
caps when its outside the heater
system.
Temperature controller RAT
Controls the temperature profiles
applied to samples.
Heater
Heats the samples.
3.1
Main parts and assembly
Assembly the digestor’s system according this guide.
Note:
The fumes have, for storing and
transportation, a small metal part to pro
-
tect the white gasket.
Remove this parts if they are from
metal.
