LOCOMOTOR Rotastand...Compact
LOCO-600 MANUAL
3 User Instructions
3.1 User Instructions for adjustments
3.1 Adjust the Rotastand Compact to suit the patient.
3.1.1 The Shin pad has 3 height settings, LOW, MIDDLE and HIGH, providing an overall adjustment of
80mm in 40mm steps.
3.1.2 The Rotastand Compact is supplied with the shin pad set to the middle height.
3.1.3 To change the height, remove the 2 fixing screws and fit using the offset holes in the shin pad.
3.1.4 Note the shin pad may need to be rotated half a turn to obtain the desired height.
3.1.5 The handle has been set to its lowest position during assembly.
3.1.6 There are 17 possible positions for the handle with an adjustment discrimination of 25mm.
3.1.7 To raise the handle height, rotate the handle clamp wheel 2 turns anticlockwise and pull the handle
release knob.
3.1.8 Raise the handle to the required height and release the handle latch knob.
3.1.9 Move the handle up or down a little untill the handle latch knob returns to its original position and
retains the position of the handle.
3.1.10 Tighten the handle clamp wheel.
3.1.11 The Rotastand Compact is now ready for use.
Select Healthcare (UK) Ltd,
Unit 2 Albert Road, Rushden, Northants, NN10 0BU
Tel: +44( 0)1933 411729 Fax: +44(0)1933 410213 Email [email protected]
Designed and Developed by: Proto Magic Innovations Ltd
Rotastand Compact OPERATING AND SERVICE INSTRUCTIONS Ver 02 .doc 10/01/2013
Page 3
Alternative screw hole
Fixing screw
