LOCOMOTOR Rotastand...Compact
LOCO-600 MANUAL
7.30 Remove the turning disc and check the underside for contamination and wear, replace if worn or
damaged.
7.31 Remove any grit or contamination from the underside of the disc and the mating surface of the
Rotastand Compact.
7.32 Check the condition of the non slip pads, replace if damaged or worn.
7.33 Replace the turning disc.
7.34 Check that the turning disc fixing screw is tight to 4 NM
7.35 Check that the screws attaching the top blue cover to the metal base are tight.
7.36 If the blue cover cannot be tightened to the metal base then the blue cover must be replaced.
7.37 Stand on the Rotastand Compact and hold the handle.
7.38 Check that there is no back or forward movement of the handle with respect to the base when back
and forward pressure is applied to the handle.
7.39 Apply pressure to the left and to the right side, there will be some movement as the chassis under
the blue moulding flexes, this is normal. if it is deemed that there is something moving or lose, then
tighten as required.
7.40 Release the black mast release flange and fold the mast down.
7.41 Check that the mast release flange returns under its spring pressure and locks the mast in place.
7.42 Check that the stabilising bar is locked in place by the stabilising bar retention pad.
7.43 Replace the SOLO stabilising bar retention pad if required
8 Spare parts
8.1 Wheel for centre or back position.
8.2 Turning disc.
8.3 Turning disc top hat bearing.
8.4 Turning disc fixing screw.
8.5 Handle.
8.6 Handle clamp wheel.
8.7 Brake pad.
8.8 Stabilising bar retention pad.
8.9 Shin Pad
8.10 Non slip pads for turning disc (set of 3)
8.11 Stabilising bar complete with foot pedal
8.12 Foot pedal for stabilising bar
8.13 Complete clamp assembly for locking handle
Select Healthcare (UK) Ltd,
Unit 2 Albert Road, Rushden, Northants, NN10 0BU
Tel: +44( 0)1933 411729 Fax: +44(0)1933 410213 Email [email protected]
Designed and Developed by: Proto Magic Innovations Ltd
Rotastand Compact OPERATING AND SERVICE INSTRUCTIONS Ver 02 .doc 10/01/2013
Page 8
Top hat bush
Turning disc
Fixing screw
Non slip pad
Stabilising bar
retention pad
