background image

REBOUND

®

 

DIABETIC 

WALKER

 

Removing 

Instructions

1. 

 Before undoing the straps, 
press the small “-“ button 
on the front of the walker 
to deflate the air bladder 

2. 

 If a compliance strap has been 
used this should be cut with 
a pair of scissors to remove. 
However this should only be 
done in case of emergency or as 
directed by your clinician. Undo 
the 3 straps (in any order).

3. 

 Remove the front shell 
and open the liner.

4. 

 While seated, remove your 
leg from the liner and 
walker simultaneously.

TIP: If you cannot easily remove 
your leg after following steps 1, 
2 and 3, try removing excess air 
in the air bladder. The air bladder 
is located inside the walker shell 
and the best way to deflate it is to 
stroke downwards on it with your 
hand, whilst pressing the “-“ button 
at the same time. 

Important: Always inspect your 
foot and leg for pressure marks or 
wounds. 

Contact a medical professional 
immediately if you experience any 
discomfort or pain or if you are 
concerned about your foot.

Отзывы: