Selco Genesis 284 PSR, Инструкция по эксплуатации

Страница: 35 / 304

35
3.5 Saving Screen
The system provides the automatic saving of all the welding
parameters on the synergic board (inside the generator) and on
the control board (RC 300).
Any difference between the data saved on the 2 devices is indi-
cated with the following screen:
Select the memory to be used for the future welding operations
by rotating the encoder.
1 Control board memory
Synergic board memory
2 Number of programs present in the memory selected
3 Save the operations carried out and return to
the main screen
4 Cancel the operations carried out
Therefore, the RC 300 remote control can be used as a data
saving device and/or to “clone” the characteristics of a pro-
grammed system, onto other systems.
3.6 Main Screen
Allows the control of the system and of the welding process,
showing the main settings.
1 Heading
Allows the display of certain pieces of important infor-
mation relating to the selected process:
- The program or the synergic curve retrieved
1d
Program retrieved
Process retrieved
1e Number of the program/synergic curve retrieved
- The real current and voltage values during the welding
phases
1f Current reading
1g Voltage reading
2 Welding parameters
Select the required parameter by pressing the encoder
button.
Adjust the value of the selected parameter by rotating
the encoder.
2a Parameter selection bars
2b Parameter icon
2c Parameter value
2d Unit of measurement of the parameter
PROCESS
MMA
ARC AIR
TIG
PARAMETER 1 PARAMETER 2
The parameters of the main screen can be personalised (consult
the “Interface personalisation” section).
3 Functions
Allow the setting of the most important process func-
tions and welding methods.
3a
Allows access to the quick choice menu (and
exit from it) - (consult the “Quick choice menu”
section)