Sekonic SR-6500 Скачать руководство пользователя страница 7

Страница: 7 / 118

Warning

Warning

●

Fire or electric shock may result if this product continues to be used

when there is a strange smell or sound.

In such a case, immediately turn the power switch off and then remove

the power plug from the outlet. After making sure that it is no longer

smoking, ask the sales shop for repair service.

Never attempt to repair by yourself since that may be very dangerous.

●

Do not modify or disassemble this device. That could cause fire or

electric shock.

●

Do not remove the cover from this device. That could cause electric

shock. Ask the sales shop to conduct any internal checking,

adjustment or repair.

Pay thorough attention to the above instructions. Otherwise, fire or

electric shock may occur.

●

Power plug precautions

• Do not pull on the cord when removing the power plug from the outlet.

• Do not use any power plug other than the specified one.

Make sure to use the adapter included in the package.

●

Device precautions

• Do not use it with a supply voltage other than the specified one.

• Do not install it in a place that may be wet with water or oil, steam,

moisture or dust.

• Do not insert or drop any metal, foreign combustible matter, etc., into

the port.

• Do not place containers with chemicals or water, or small metal pieces

near the device.

●

Do not cover the vent hole. That could cause heat retention, resulting

in fire.

●

If the device is dropped or the cover is broken, immediately turn the

power switch off and remove the power plug from the outlet. Then,

contact the sales shop.

●

If any foreign matter should enter inside, immediately turn the power

switch off and remove the power plug from the outlet. Then, contact

the sales shop or Sekonic. If the device continues to be used with

foreign matter inside, fire or electric shock may occur.

If water or other substances penetrate the unit, immediately turn the

power switch off and remove the power plug from the outlet. Then,

contact the sales shop or Sekonic. If the device continues to be used with

water or other foreign matter inside, fire or electric shock may occur.

●

Do not spray any materials containing an inflammable gas or liquid on

the device and be sure to keep this kind of materials away from this

device.

Use a cleaning cloth with suitable amount of cleaning liquid to wipe

off well, after removing the power plug from the outlet and the device

becomes to cool off.

Содержание SR-6500























































































































Результаты поиска

Содержание SR-6500

Отзывы:

Похожие инструкции для SR-6500

Бренды по названию

Популярные бренды

Sekonic SR-6500, Руководство по эксплуатации

Результаты поиска

Содержание SR-6500

Отзывы:

Похожие инструкции для SR-6500

Бренды по названию

Популярные бренды