TDS – Timed Dosing System
Instruciton manual TDS series
Code 0000136687
rev. 1.1
9
4.2
PROGRAMMING
4.2.1
Controls of the digital clock
The clock is situated on the inside of the front cover. On the front of the clock there are the following elements:
•
I AUTO O
: switch for selecting the operating mode,
continuous
(I),
automatic
(AUTO), system
excluded
(O).
•
RUN P:
selector for
setting the time on the timer
(
), for
operating the timer
(RUN), for
programming the timer
(P).
•
Numbers from 1 to 7
: series of numbers useful for programming the timer and the clock. They indicate
the day(s) of the week by means of the symbol(s)
L
on the display in positions
corresponding to the numbers
•
push-button “P”
: to confirm the programming that has been done and go on to the next step
•
push-buttons “1…7”
: for selecting the programming blocks by means of the symbols
L
shown on
the upper part of the display.
The sequence is cyclic, and is: 1 (Monday), 2 (Tuesday), 3 (Wednesday), 4 (Thursday), 5 (Friday), 6
(Saturday), 7 (Sunday); 1…5 (from Monday to Friday), 6…7 (Saturday and Sunday); 1…6 (from Monday to
Saturday), 1…7 (from Monday to Sunday).
•
push-button “h”:
for selecting the hours at the time of programming.
•
push-button “m”:
for selecting the minutes at the time of programming
.
•
push-button “
¡
¡
¡
¡
”:
SKIP push-button
.
•
push-button “R”:
reset.
