TDS – Timed Dosing System
Instruciton manual TDS series
Code 0000136687
rev. 1.1
4
2
INSTALLATION
Check all applicable plumbing and electrical codes before proceeding with the installation. This will help to
ensure that the system is installed in safe and suitable manner.
CAUTION: Do not mount the unit in the direct path of steam. This can short circuit and
permanently damage the unit.
WARNING: Before installing the device and before intervening in any way on the metering unit,
make sure that the power supply is disconnected.
2.1
Mounting the system
•
Apply the panel unit system with the brackets and screws supplied
•
Determine a suitable location for the system
•
Using the bracket as a template, mark and drill holes for bolting the system to the wall
•
Insert the anchors in the holes
•
Bolt the bracket in place (flat side against the wall with holes on bottom) with the hardware provided
•
Open the cabinet front, completely unscrew the screws at the right.
