TDS – Timed Dosing System
Instruciton manual TDS series
Code 0000136687
rev. 1.1
3
1.4 Warnings
Read this manual carefully before installation and before starting up the TDS system.
Check the model of the equipment bought, when using the installation and programming settings
indicated in this manual.
For all connections refer to the topographical diagram for the control circuit given in this manual.
WARNING: Always follow the necessary safety procedures, including the use of adequate
protection for the eyes, face, hands, and clothing.
WARNING: When installing or carrying out maintenance on this equipment, always disconnect it
from the power supply.
Seko is constantly striving to improve all its products, and we therefore reserve the right to make
changes at any time without notice.
Failure to abide by the indications given in this manual may result in damage to people or
property, or compromise or damage the equipment itself.
1.5
Material required during installation
An installation kit is available (see Maintenance & Accessories).
