-
Prior to use, please read the safety precautions and instruction manual thoroughly to use the product properly.
-
-
Please keep the manual in a handy place for later reference.
●
The various marks have the following meanings:
Improper handling may lead to a bodily injury or property damage.
WARNING
Do ’t o ert the produ t.
Conversion might cause the product to fall or result in a fire or electric shock.
Prohibited.
Be careful of
ignition.
After installing the product, be sure to hand the safety precautions and instruction manual over to the user of the product.
Caution
WARNING:
CAUTION:
Improper handling may lead to a human death or serious bodily injury.
If you use a product in a hazardous location where there is a gaseous, steamy or dusty atmosphere, it should be of the
flameproof type suitable for the location. Use of an unsuitable type apparatus might cause an explosion or fire.
The ambient temperature should be within the operating temperature range specified in the instruction manual. If the
product should be used at a temperature higher than specified, an early lighting failure or malfunction might occur or an
explosion or fire might result.
If a product must be oriented in a specific manner for use, install it properly according to the marking on its body or the
instruction manual. Otherwise, an explosion, fire or electric shock might result.
Don’t touch.
Disassembly &
conversion
prohibited.
Don’t use near
a water source.
Be sure to
follow the
instructions.
Be sure to
ground.
For electrical connections, use crimp-type terminals, etc. to secure the connections and conduct insulation treatment. An
inadequate connection or inadequate insulation might cause an imperfect contact, leading to an explosion, fire or electric
shock.
Be sure to turn
off the power.
In grounding work, be sure to follow the technical standards for electrical equipment and explosion-protected equipment of
your country. Inadequate grounding might cause an explosion, fire or electric shock.
When leading the power cable into the product, be sure to follow the technical standards for electrical equipment and
explosion-protected equipment of your country. Inadequate cable connection or waterproofing might cause an explosion,
fire or electric shock.
Do ’t e d, t ist or pull the po er a le y for e.
Inadequate handling of the cable might damage it and result in a fire or electric shock.
When replacing the lamp, make sure that the lamp is of the type specified in the instruction manual or the instruction on
the body. An unsuitable lamp might cause an explosion, fire or electric shock.
Do ’t o er the produ t ith a i fla
a le aterial su h as loth or paper or put a ythi g i the produ t.
Such a material or thing might cause an explosion or fire.
Before replacing the lamp or cleaning, be sure to turn off the power.
Otherwise, a fire or electric shock might result.
直L G13 照
6
11E0001123B11
Safety Precautions
To be conserved
The parts once removed for lamp replacement or cleaning should be replaced in their original places properly according to
the instruction manual. An improperly placed part might fall, leading to an explosion or injury or property damage.
- 1/2 -
