TAG02M0000SE 035670 161120
8
5.
By pressing multiple times the ‘
OK
’ button it is possible to
scroll down the following list:
DATA
DETAIL
RANGE DEFAULT
HIGH
Heating mode upper limit setting
- Comfort
5°C .. 85°C
85°C
LOW
Heating mode lower limit setting
- Comfort
5°C .. 85°C
5°C
HIGH
Heating mode upper limit setting
- Economy
5°C .. 85°C
85°C
LOW
Heating mode lower limit setting -
Economy
5°C .. 85°C
5°C
HIGH
Cooling mode upper limit setting
- Comfort
5°C .. 85°C
85°C
LOW
Cooling mode lower limit setting -
Comfort
5°C .. 85°C
5°C
HIGH
Cooling mode upper limit setting
- Economy
5°C .. 85°C
85°C
LOW
Cooling mode lower limit setting -
Economy
5°C .. 85°C
5°C
6.
For each shown data, by pressing the buttons ‘
’ and ‘ ’
it is possible to modify the set limits within the desired range;
to exit push the button ‘
’ or wait 20 seconds.
SETTING THE USER PARAMETERS
To enter the mode for setting the programmable thermostat
parameters, proceed as follows:
1.
Press the ‘ ‘ button; the display will show the ‘
P
‘ icon
(bottom right) and the word ‘
PrOG
‘.
2.
Press the ‘ ‘ button repeatedly to scroll through the user
parameters:
Schedule Programming
‘
PrOG
’
Antifreeze Setting
‘
AFr
’
Setting the Differential for the first stage
‘
d1
’
Setting the Differential for the second stage
‘
d2
’
Setting the Differential between first and
second stage
‘
d12
’
Setting Timer of the first and second stage
‘
tMr2
’
Remote sensor Offset setting
‘
OFS1
’
Heating/Cooling function Setting
‘
H-C
’
Summer time setting
‘
StM
’
Reset to default data
‘
dFLt
’
3.
Press the ‘
OK
’ button to modify the selected parameter; the
‘
P
‘ icon flashes.
4.
Configure the data associated with each individual parameter
as illustrated below.
5.
To quit from the user parameters setting, press key ‘
’ or
wait 10 seconds without pressing any key.
‘ PrOG ‘: SCHEDULE PROGRAMMING
Usually the circular band of dashes in the display shows the
operating mode (Comfort, Economy, Off / antifrost) of the
programmable thermostat, while the vertical strip on the left
shows the current day of the week (1=Monday .. 7=Sunday)
highlighted with a square around the number to which it relates
programming.
To facilitate the programming operation it is sufficient to
remember this rule
:
Economy mode: one dash
lit (internal).
Comfort mode: two
dashes lit.
Off/Antifreeze mode: no
dashes lit.
Days of the week: 1
Monday .. 7 Sunday. The
box indicates the current
day or group of days.
To set the program schedule proceed as described below:
Note:
You will exit the programming mode without
memorizing the programmed schedule if more than
10 seconds elapse and you do not press any button;
or else you can confirm the settings in sequence
by pressing the ‘OK’ button without making any
changes.
1.
Select parameter ‘
PrOG
’ and press button ‘
OK
’: the display
shows the word ‘dAy’, icon ‘
P
‘ and the square symbols
corresponding to the current day or group of flashes.
2.
Press buttons ‘ ‘ and ‘
‘ to set the combination of days to
be programmed.
In the following the four available combinations are listed:
2nd combination
of days
1st combination
of days
7
6
2
3
4
5
1
4th combination
of days
(Schedule Day
by Day)
3rd combination
of days
(Mo)
(Fr)
(Th)
(We)
(To)
(Su)
(Sa)
7
6
2
3
4
5
1
7
6
2
3
4
5
1
7
6
2
3
4
5
1
Note: For each day combination, the time schedule set will
be the same for all days within each single group.
3.
Press the ‘
OK
‘ button to confirm the setting made; the display
will show the schedule previously programmed for the set day
or group of days and the time 00.00 (cursor flashing on the
interval between 00.00 and 00.30).
4.
Set the operating mode.
To facilitate the programming operation, the programmable
thermostat is factory preset with the following time intervals:
TIME INTERVALS PRESET
Comfort mode
Economy mode
6.00 .. 8.00
8.00 .. 11.00
11.00 .. 13.00
13.00 .. 17.00
17.00 .. 23.00
23.00 .. 6.00
Alternatively, if the preset time interval doesn’t fit the required
needs, you can change it manually as follows:
5.
For every time interval (each dash corresponds to a half
hour) set the operating mode by pressing one of the following
buttons:
Comfort mode:
Press the ‘
‘ button.
Off / Antifreeze:
Press the ‘
‘ button.
Economy mode:
Press the ‘
‘ button.
Moving the time cursor
:
Press button ‘ ’ or ‘ ‘.
Each time the button which sets the regulation mode is
depressed, the time cursor automatically jumps into the next
half hour.
Confirm
Confirm
Comfort
Comfort
Off
Off
Economy
Economy
6.
After programming the schedule for the day or group of days
selected, press the ‘
OK
’ button.
The display will show the program schedule for the next day
or groups of days until the whole week is covered.
7.
After programming the schedule for the entire week,
press the ‘
OK
’ button. The programmable thermostat will
