Seiler Evolution Zoom, Руководство пользователя

Страница: 20 / 36

20
Cleaning
General
• The general cleaning of The Seiler Evolution Zoom Microscope shall be carried out with lint-free clothes or
wipe tissues moistened in an appropriate non-abrasive cleaning agent. Steel-wire brushes, knives, erasers,
emery cloth, sandpaper, and other devices that produce an abrasive action or cause contamination shall NOT
be used.
• Water with neutral detergent is the most appropriate for the cleaning process. Do NOT use organic solvents
to clean the external surfaces of the equipment (such as gasoline, ethanol, kerosene), since they can harm
painted surfaces.
• Eyecups are threaded onto the eyepieces and it can be taken apart for cleaning purposes. Sterilization of them
shall NOT be carried out in autoclaves or ovens (Figure 17).
• The knob silicone covers of the optical module can be sterilized in autoclaves or ovens.
•
Control components such as buttons may be shielded from contact by a plastic film.
Caution: The equipment must be switched off and disconnected from the power outlet prior to the cleaning
process. Before reconnecting the unit to the power outlet, allow the cleaning material to dry completely.
Caution:
The multifunctional pedal’s electric circuitry is NOT waterproof. Avoid spilling water directly onto it.
Before cleaning the floor on the unit is placed, make sure to hang up the pedal in its transport handle at the column
(Figure 2).
Caution: Do NOT tilt the unit during the cleaning procedure. This increase the risk of cleaning agents seeping
into the device and causing damage and electrical safety hazards.
Caution: The microscope shall NOT be exposed to dust and other contaminating substances. Always protect the
optical module with its protective cover when the unit is NOT being used.
Figure 17: Eyepiece eyecup of the optical module