Seiler Evolution Zoom, Руководство пользователя

Страница: 10 / 36

10
Assembling the base
When assembling the base:
1. Place two boxes around 5” thick under the base to support it when it is sitting on the neck.
2. Remove the two countersunk screws with a 7/32” hex wrench.
3. Place the two spacers between the plate and the stabilizer bar with the white pads facing you and bolt it on with
the two bolts supplied with the spacers.
4. Add outer bolt to leg without the spacer. Start a few threads.
5. Add spacer to the inner bolt hole, insert bolt. Tighten both.
6: Make sure leg attachments protrude outward as shown in photo 6.
1
2
5
4
3
6