Seiler Evolution Zoom, Руководство пользователя

Страница: 19 / 36

19
Figure 16: Changing the fuses
LED reliability and lifetime (only for units with LED source)
• The LED source selected is one of the most reliable light sources in the world today. It has passed a rigorous
suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature
cycling and humidity, and has been fully qualified for use in extreme high power and high current applications
(paragraph 9.2).
• Failure rate: very low.
• Lifetime: lumen maintenance of greater than 70% after 60,000 hours.
• In case of LED technical issues, please contact the AUTHORIZED TECHNICAL ASSISTANCE.
Replacing a blown fuse
• Shift the main switch on the control panel to OFF (Figure 5) and disconnect the power plug from socket
(Figure 8).
• The fuse holder located on the electrical panel of the column covers 2 safety devices inside (Figure 8) Open
the cover and replace the blown fuse. Only 5A fuses shall be used (2 spare components are supplied).
Repairing the equipment
• To ensure an extended lifetime of the Seiler Evolution Zoom Microscope , the user is encouraged to
periodically consult Seiler Instrument to check the condition of the equipment and perform maintenance
as necessary. The AUTHORIZED TECHNICAL ASSISTANCE are reserved the right to repair or to perform
periodical maintenance or part replacement, whenever necessary.
• In the event of any defect in The Seiler Evolution Zoom Microscope , consult Seiler Instrument immediately
after receiving the product.
CAUTION:
The equipment and its parts must be discarded according to the applicable environmental and
discarding regulations. Always check if the device component presents risks to the personnel and the environment,
in order to ensure safety discard, in accordance with the applicable laws (Chapter 11).
PLEASE NOTE:
Do NOT ship
the Seiler Evolution Zoom Microscope
to the supplier, without consulting the
AUTHORIZED SEILER DISTRIBUTOR.