Section 2: Sacksafoam Installation
Models 8018, 2044 and 5550
2015 Sacksafoam I Operations Manual
(Version E)
4
Models 8018, 2044 and 5550
Installation Procedure
To install the sack:
1.
Release the bottom end of the ballast side IDS
restrainer cable by removing the clevis pin from
the restrainer bracket inside the bucket.
2.
Tie the restrainer cable out of the way where it
will not interfere with bucket operation. It may
be reused to restrain the IDS hub if the sack and
IDS restrainer strap are later removed.
Important Note
If the Bambi bucket cinch strap hook is on the ballast side of the bucket, it must be rotated 180
degrees to the opposite side, to allow cinch adjustment once the sack is installed.
Removing the clevis pin
UNCONTROLLED COPY IF PRINTED
