Section 5: Operations
Using the Controller
2015 Sacksafoam I Operations Manual
(Version E)
24
Custom Set-Up
Normally, you would not require this option unless you are using a non-standard bucket or you employ load
shedding or cinching. If so, the bucket capacity and, if necessary, the flow rate of the injection system can
be configured to suit your particular operational requirements. To begin, from the set-up screen, tap the gear
symbol.
Tap the arrows on the configuration screen to adjust capacity or flow rate as desired. When finished, tap the
check mark.
Set-Up Screen
Tap the gear
symbol.
Configuration Screen
Tap arrows up or
down to adjust
capacity.
Tap arrows up or
down to adjust
flow rate.
Tap the check
mark when
finished.
UNCONTROLLED COPY IF PRINTED
