Section 5: Operations
Using the Controller
2015 Sacksafoam I Operations Manual
(Version E)
22
Initiating Foam Injection
To initiate foam injection, set the intended foam concentration using the main screen. Tap the green arrow
symbol or tap within the runtime window or activate your external operator switch. The SFC will display
the injection progress.
Saving Settings Permanently
Settings can be permanently saved to non-volatile memory. Upon a restart of the SFC, the saved settings
are automatically loaded. From the set-up screen, tap the disk symbol to save your settings. A confirmation
window will open to inform you of the successful save operation. To dismiss this window, tap on the symbol
displaying the check mark symbol.
Main Screen
Initiate foam
injection by
tapping green
arrow or tap within
the runtime
window or use
your external
switch.
Set-Up Screen
Tap the disk
symbol.
To dismiss this window, tap on the check mark
symbol.
UNCONTROLLED COPY IF PRINTED