Section 2: Sacksafoam Installation
Model 7698
Sacksafoam I Operator’s Manual
(Version C)
10
Model 7698
Installation Procedure
1.
Release the bottom end of the ballast side IDS restrainer cable by removing the clevis pin from the
restrainer bracket inside the bucket. See picture above for locations.
2.
Tie the restrainer cable out of the way so that it will not interfere with bucket operation. It may be
reused to restrain the IDS hub, if the sack and IDS restrainer strap are later removed.
3.
Adjust the chain connected to the IDS restrainer strap to the length which corresponds to your
bucket size. Then connect a 1/4" quick link. Attach the quick link to the IDS hub.
4.
Disconnect the four spokes centred over the ballast bars by removing the clevis pins or bolts
which connect spokes to the shell brackets.
HL7600
45
HL9800 48
7698
Chain length specifications for this model.
#1
#2
#3
#4 (unseen
in photo)
Disconnecting the spokes
