Section 2: Sacksafoam Installation
Model 7698
Sacksafoam I Operator’s Manual
(Version C)
11
5.
With the hardware supplied, attach the sus-
pension hanger and spoke to the shell bracket.
6.
Fold up the sack and slide it in between the spokes and into the bucket. The sack should be cen-
tred on the ballast pouch. The IDS restrainer strap and sack harness, attached in steps 3 and 4,
should pass around the bottom of the sack.
7.
Connect the spring links on the sack to the suspension hangers on the bucket.
8.
Straighten out the sack so that it sits straight inside the bucket.
9.
Connect the control cable to the waterproof connector on the sack.
10. Install the breakaway connector in the control cable near the Bambi control head. Secure the con-
trol cable to one of the Bambi suspension cables using the tie wraps provided. The connector may
be taped together to prevent premature release.
Caution
Ensure the white waterproofing washer is installed inside the receptacle.
