manualshive.com logo in svg

SEH ThinPrint TPG120, Руководство пользователя, Страница: 94 / 120

Поделиться
Скачать
SEH ThinPrint TPG120 Скачать руководство пользователя страница 94

Maintenance

TPG User Manual

94

Resetting Parameters via an FTP Connection

Proceed as follows:

1. Open an FTP connection to the TPG:

Syntax:

ftp <IP Address>

Example:

ftp 192.168.0.123

2. Enter the password of the TPG, if applicable, or press ENTER.
3. Reset the parameters:

quote SITE RESET

4. Close the FTP connection:

quit

5. Disconnect the power socket on the TPG for a moment. 

ª

The parameters are reset.

Resetting Parameters via the TPG Status Button

The reset process comprises three different steps.

 •  In the first step, the TPG is forced into reset mode. The 

parameters are reset in this mode.

 •  The second step involves restarting the device.

 •  In the third step, a status page is printed. The status page can be 

used to check whether the parameters were successfully reset.

IMPORTANT: The reset mode is signaled by the simultaneous flas-
hing of the Activity LED (yellow) and the Status LED (green) and
remains active for the duration of five flashes. 
The status button must be released within this time frame, other-
wise the TPG will go into BIOS mode. In this case you need to
start the reset process again.

Содержание ThinPrint TPG120

























































































































Отзывы:

Нет отзывов