SEH ThinPrint TPG120, Руководство пользователя, Страница: 59 / 120

ThinPrint® Settings
TPG User Manual 59
2. Double-click the TPG in the device list.
The Properties dialog appears.
3. Select Configuration – ThinPrint® from the navigation bar.
4. Select the Connection Service tab.
5. Tick Connection Service .
6. Enter the relevant data; see: Table 6
Ö
59.
7. Click OK to confirm.
ª
The settings are saved.
Table 6: Connection Service Parameter
If a connection to the Connection Service was refused, it is because
a value (client ID, authentication key, or IP address) was entered
incorrectly. Check and modify your settings and reestablish the con-
nection to the Connection Service manually. For this purpose, click
Reconnect .
Parameters Description
Connection Service Enables/disables the .print Connection Service
Connection Server IP address of the server on which the Connection
Service is installed.
Port Port number used by the TPG to communicate with
the Connection Service (default = 4001)
Client ID Client ID as stored in the database of the Connection
Service. The client ID is needed by the Connection
Service to forward print jobs to the TPG.
Authentication key Authentication key as stored in the database of the
Connection Service.
Keep alive Interval (in seconds) for refreshing the connection to
the Connection Service.
The value has to be lower or equal than the
'KeepAliveTO' parameter of the .print Connection
Service (server side).
(allowed entry: 30 - 180 | default = 60)
Connection retry Interval (in seconds) for connection retries if the
Connection Service is not reachable.
(allowed entry: 5 -6000 | default = 120)